Strict inspection water treatment equipment supplier 10000lh exporter for the global market

Company Advantages
1. EcoPura reverse osmosis water filtration has to go through parts cleaning, drying, welding, and polishing. All these processes are scrutinized by specific technicians who have specialized knowledge. It can be configured in a straight line or in an L-shaped configuration
2. Shenzhen EcoPura Water Equipment Co.,Ltd has established countrywide sales network. The product has a reliable electrical system, without any short circuit, or electric leakage occurring
3. reverse osmosis water filtration has good performance and can be manufactured conveniently, it is a water treatment equipment supplier which is applied most extensively. The product is easy to clean with no blind corners

Softener system is necessary part for the water purification plant if the inlet raw water hardness higher than 100mg/l, we call Hard-water,it’s the reason for the scale occur , we can remove the hard irons (Ca+ Mg+) by Softening process .
A water softener is an ion exchanger.
Hard water—water with a high calcium/magnesium content—enters the softener through the “In” port indicated by the green arrow. It passes through the control valve and into the tank, where it goes from top to bottom through a specially prepared resin that “softens” it.
The resin consists of specially manufactured beads that have been saturated with sodium ions. “Softening” occurs as the hardness minerals in the water attach themselves to the resin and are “exchanged” for sodium.
The softened water then enters the long center tube, called a riser, via the strainer basket in the bottom of the tank and passes upward through the riser. The water exits the softener via the control valve (blue arrow) and is sent to the home.
When the resin becomes saturated by hardness minerals, the softener automatically goes into regeneration. (The regeneration process is initiated by a timer or a meter, depending on the type of softener you purchase.) By this process the hardness minerals are washed down the drain (via a drain tube not shown in the diagram), and the resin bed is rinsed, resettled, and recharged with sodium. It is now again ready to soften your water.
The regeneration process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can regenerate the softening resin again and again.

Company Features
1. With the massive advantage of high capacity, Shenzhen EcoPura Water Equipment Co.,Ltd is expanding its production scale to meet the higher requirements for water treatment equipment supplier . The factory is reasonably built in line with the requirements for standard workshop. We have reasonable arranged production lines and newly advanced facilities have been brought in to increase productivity.
2. Our business strength is derived from the cumulative experience of our team members. They have combined practical business experience with strong technology delivery capabilities, bringing the best results of our products.
3. We have our own advanced manufacturing facilities. This enables us to closely monitor every stage of the production process so that we can ensure the highest standard of quality. EcoPura is committed to providing more advanced technologies, better reverse osmosis water filtration and more thoughtful services, and helping fuel the development of society. Please contact.