Softener system is necessary part for the water purification plant if the inlet raw water hardness higher than 100mg/l, we call Hard-water,it’s the reason for the scale occur , we can remove the hard irons (Ca+ Mg+) by Softening process .
A water softener is an ion exchanger.
Hard water—water with a high calcium/magnesium content—enters the softener through the “In” port indicated by the green arrow. It passes through the control valve and into the tank, where it goes from top to bottom through a specially prepared resin that “softens” it.
The resin consists of specially manufactured beads that have been saturated with sodium ions. “Softening” occurs as the hardness minerals in the water attach themselves to the resin and are “exchanged” for sodium.
The softened water then enters the long center tube, called a riser, via the strainer basket in the bottom of the tank and passes upward through the riser. The water exits the softener via the control valve (blue arrow) and is sent to the home.
When the resin becomes saturated by hardness minerals, the softener automatically goes into regeneration. (The regeneration process is initiated by a timer or a meter, depending on the type of softener you purchase.) By this process the hardness minerals are washed down the drain (via a drain tube not shown in the diagram), and the resin bed is rinsed, resettled, and recharged with sodium. It is now again ready to soften your water.
The regeneration process is accomplished by passing very salty water from the brine tank through the resin. The brine tank must remain filled with softener salt at all times so that it can regenerate the softening resin again and again.
SMC GRP FRP STORAGE Water Tank
Material | GRP/FRP/SMC |
Size | 1x1m, 1x0.5m, 0.5x0.5m |
Panel Shape | Ball shape |
Thickness | 4-16mm |
Remarks | Thickness Tolerance: ±0.2mm |
Volume | From 1m3 to 1000m3 |
COLOR | White,Blue,and so on |
SMC water tank physical and chemical properties | ensile strength (Mpa)≥60 |
Bending strength (Mpa)≥100 | |
Bending modulus (Gpa)≥7.0 | |
Pap hardness≥60 | |
Bibulous rate,%≤1.0 | |
Glass fiber content,%≥25 | |
Leakage | No leakage after filled with water |
Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
SMC GRP FRP Storage Water Tank application:
1). storage and regulation of living water supply & construction water supply
2). Rainwater Harvesting & Storage
3). Effluent/Acid and alkali solution treatment & Storage
4).Hospital,buildings,building site, school and other place
5). temporary water storage for expansion of the heating system, condensate tank and construction, geological survey, industry, National defense project etc
SMC GRP FRP Storage Water Tank features:
1. Excellent UV and weather-resistant characteristics; Corrosion resistant; anti-rusted.
2. High strength and Durability.
3. Non-leakage.
4. Excellent Hygienic, good water quality: non-toxic and corrosion from panels and prevent bacteria increasing.
5. High seismic tolerances; Does not deform or dent.
6. Low thermal conductivity and excellent thermal insulation.
7. Easy to clean and maintenance management convenient.
SMC GRP Modular Storage water Tanks can be used as:
Agricultural Irrigation Tanks.Maintenance Manual for SMC(GRP) Water Tank
Certifications
NCF & ISO & CE & EN & MET
Copyright © 2025 Shenzhen EcoPura Water Equipment Co.,Ltd | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.