standard blow moulding process 6el trade partner for b2b

Company Advantages
1. EcoPura moulding machine has been tested according to the general standards. It is tested in terms of functionality, strength, stiffness, wears, and corrosion. The product has the advantage of low failure rate
2. After years of improvement, the product has received more and more attention at home and abroad and has great commercial value. Made of stainless steel materials, the product has a smooth surface to resist dust and dirt
3. The product is energy-efficient. It can operate under lower temperature and energy settings, which sustains its functionality until the task is completed. The product has a reliable electrical system, without any short circuit, or electric leakage occurring
4. The biggest advantage of this product is energy saving. It can make self-adjustment in accordance with the different pressure needed during production to reduce energy consumption. Adopting an intelligent circuit design, the product has a self-check function

Product Detail

EcoPura standard blow moulding process trade partner for b2b-1

EcoPura standard blow moulding process trade partner for b2b-2

EcoPura standard blow moulding process trade partner for b2b-3

EcoPura standard blow moulding process trade partner for b2b-4

Product Parameter

Model	EPC6L-2	EPC6L-3
Mold Cavities	2	3
Speed	1400bph	3000bph
Bottle Size -Max	6L	6L
Bottle Height	＜400 mm	＜400 mm
Bottle Neck	＜20 mm	＜20 mm
Bottle Body Diameter	＜180 mm	＜180 mm
High Pressure Air Consumption	3000L/min	4000L/min
Installation Power	55kw	150kw
Practical Power	20-30kw	40-70kw
Machine Size	L3.1mW1.92mH2.3m	L4.4mW2.2mH2.3m
Weight	4500kgs	10000kgs

Product Features

♦ Stable performance with advanced PLC.
♦ Conveying preforms automatically with conveyor.
♦ Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
♦ High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
♦ High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
♦ No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
♦ Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
♦ Strong clamping force with high pressure and double crank links to lock the mold.
♦ Two ways of operating: Automatic and manual.
♦ Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
♦ Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
♦ Contamination is avoided for the bottle body.
♦ Ideal effect of the chilling with the chilling system.

Company Features
1. Supported by exceptional technology capacity, Shenzhen EcoPura Water Equipment Co.,Ltd does perfectly in the blow moulding process marketplace.
2. Our factory delivers standardized production which is yielded by well-trained and highly motivated employees in combination with the most modern and eco-friendly machinery.
3. We insist on the principle of "quality and innovation first". We will develop more quality products to meet the customers’ requirements and seek valuable feedback from them.

h******d

EcoPura moulding machine has to go through an entire production process. From concept development, through detailed mechanical design&control systems design, manufacture, and final commissioning, each process is well conducted. The product is equipped with air conveyor and frequency control

e******h

The design of EcoPura blow moulding process is the integrated knowledge of physics and electrochemistry. It is created using the knowledge of condensed matter physics, plasma physics, and activity coefficient of the electrolyte solution, ion strength, etc. Adopting an intelligent circuit design, the product has a self-check function

l******u

EcoPura moulding machine is developed under the guidance of water treatment technicians and water management professionals who provides comprehensive advice on the pool cleaning solution. The product is able to provide a great purifying effect

m******y

EcoPura blow moulding process has been tested in all aspects. It has been detected in terms of insulation resistance, current leakage, and current load. It can be configured in a straight line or in an L-shaped configuration

u******m

In creating a design for EcoPura blow moulding process, one of the components that interact is the element of design. Its element and principles of design are flexible and could be interpreted within the context of current fashion. Its overload protection function can effectively protect operators from harm

y******b

The scope of usage of blow moulding process have been enlarged gradually due to its blow moulding process properties. The operation of this product is controlled by microcomputer

Product Message

*Name

Phone

*E-mail

*Content

EcoPura standard blow moulding process trade partner for b2b